Welding requirements for aluminum truss stage and seam

  • Plate type node aluminum truss stage, including gusset plate and aluminum truss stage web and chord connected to it, characterized in that there are two grooves on the gusset plate, one of which is used for implantation and connection, and the other is used for implantation and connection Abdomen stick.

    The chords are connected to the gusset plate by bolts or rivets, and the web rods are also connected to the gusset plate by bolts or rivets, so the gusset plate is connected with aluminum alloy rods on the horizontal, vertical and diagonal lines. The direction and force are reasonable. The aluminum truss stage system has a reliable structure and is easy to design, manufacture and construct.

    We have designed and manufactured special welding equipment for the welding requirements of aluminum truss stage aluminum alloy pipes and joints. According to the welding sequence requirements, a programmable controller is used to control the logical sequence of the welding equipment, and the MIG automatic welding process for inert gas shielded welding of aluminum truss stage aluminum alloy pipes and joints has been developed. Aluminum truss stage materials are divided into 6061-T6 and 6082-T6. As we all know, aluminum is a relatively soft metal, so the shelf is softer, which means it easily collapses, so hardness is very important. 6082-T6 has better hardness than 6061-T6, and aluminum truss stage has self-healing ability. The higher the quality, the higher the repair ability. Of course, with the improvement of quality, the price of aluminum truss stage will also increase. What I want to explain here is. Even if the same 6082-T6 or 6061-T6, different aluminum factories will have differences, so the supply of goods is very important to ensure the quality and stability of the hardness of each aluminum frame. Secondly, check the diameter of the main pipe, the thickness of the pipe wall and the thickness of the auxiliary pipe. The main diameter of the aluminum truss stage is 50MM, the tube wall thickness is 3MM, and the auxiliary tube is 50MM. This is the most conventional specification. However, in order to sell at a low price to expand turnover, some companies have lowered the specifications of aluminum truss stage tube walls or sub-tubes for low-price sales.